Products

Product Description:

• Gas Type: Hydrogen (H2)
• Range: 0-1000 ppm
• Resolution: 2 ppm
• Operating Temperature: -4 to 122 F (-20 to 50 C)
• Low Setpoint: 100 ppm
• High Setpoint: 500 ppm
• Size: 2.74"H x 2.63"W x 1.42"D
• Weight: 3.56 oz
• Battery: ER14355 2/3AA lithium thionyl chloride
• Display: LCD (128x64) with back light
• Display Readout: Real-time reading
• Control: 1 button
• Sampling: Diffusion
• Alarms: Multi-tone audible (95 dB @ 30 cm/12"), vibration, visible, and on-screen indication of alarm condition
• Datalogging: Continuous datalogging (6 months @ 5 second intervals), user configurable intervals (1 to 300 seconds)
• Humidity: 5-95% RH (non-condensing)
• Calibration: Calibrate every 6 months and you should replace your BW Solo after sensor failure (Sensor Life: approx. 2 years)

More Information

• Sensor Type    Hydrogen 0-1000 ppm
• Call For Price    No
• Gas    Hydrogen (H2)
• Sensor Type    GSE (Gas Sensitive Electrochemical)
• Operational Temperature Range    -4 to 122 F (-20 to 50 C)
• Weight    3.6 to 4.1 oz / 103 to 116 g (depending on installed sensor)
• Dimensions    2.7 x 2.6 x 1.4 in / 7.0 x 6.7 x 3.6 x cm
• Datalogging    No
• Datalogging Note    Datalogging requires accessory
• Field Replaceable Sensor    Yes
• Field Replaceable Battery    Yes
• Warranty    1 Year
• Audible Alarm    Yes
• Calibration    6 Months
• Sensor Life    2 Years
• Range    0-1000 ppm
• Sensor Range    0-1000 ppm

Sensors

The 1-Series sensor used by the BW Solo is a single-gas detector developed by City Technology, a Honeywell company with 40 years of experience in manufacturing gas sensors. Sturdy and reliable, these sensors are capable of consistent operation in harsh environments and last up to 2 years, depending on exposure. The compact square design of the 1-Series sensor allows gas to diffuse into it more quickly, getting a faster response and accurate readings.

Operation

The Honeywell BW Solo uses a one-button operation system making it easy to use even while wearing gloves. Using the device itself or the Honeywell Safety Device Configurator software, you can customize set points, latching alarms and other parameters as well as have access to measurements such as short-term exposure limit, time weighted average, and the highest concentration of gas detected in the past 24 hours even if an alarm was not triggered.

The Honeywell BW Solo’s alarms include red LED illumination to guarantee high visibility as well as audible and vibrating alarms that are noticeable even in noisy environments.

Maintenance

The BW Solo is designed to simplify filter replacement by coming equipped with a detachable panel on the front of the device that can be removed by hand. From there, the sensor itself can be replaced as well without exposing the circuit board.